Dark Clan Forum

Welcome, Guest. Please login or register.

Login with username, password and session length
Pages: [1]   Go Down
Print
Author Topic: UT99 Demo Manager 3 by UsAaR33 with extensions by {GkC}Poema: Commands  (Read 714 times)
VegasKill
Administrator
*
Offline Offline

Posts: 3869



« on: Tue 16.12.2014 00:29:14 »

The Demo Manager delivered with RypelCam is vastly extended by {GkC}Poema. Unfortunately, I couldn't find a documentation or readme. From the source code, below is a list of console commands from the Demo Manager 3. You may add some commands to key binds in the User.ini.

    Commands of the Demo Manager 3:
- stopDemo: Stops playback
- slomo x: Controls speed of playback
- ghost: Enables ghost mode, so that the spectator can go through walls
- goto time slomotime: Goto a specific time in the demo. Time should be the remaining time, example 1701 is 17:01 remaining
- pauseafter time: Pauses the game after x amount of seconds
- pauseonnextevent: Pauses the game when an avent occurs, for instance when a player is killed
- PlayBack x: Toggle playback mode mid-demo.  0=timebased, 1=framebased, 2=noframecap
- SeekTo x: Seek to the demo at time x. (i.e. seekto 130 goes to the 2 minute, 10 second mark).
- Viewself: View from the spectator in 3rd person mode
- ViewRecorder: view from the player who recorded the demo. (only client demos!)
- FollowPlayer: View from the player you are currently looking at.
- FindFlags: View from the flags in a CTF game.

    Overview of on-screen options (added by {GkC}Poema):
- linkplayer: Links to the current player. In freecam mode the killmessages of this player will be shown
- linkteam: Links to the current team. In freecam mode the killmessages of all players of this team will be shown
- linkteamfc: Links to the current flagcarrier of the current linked team. First execute linkteam
- showmkillmsgs: Determines how many multikillmessages are shown. Four settings are possible

    Overview of camera options (added by {GkC}Poema):
- showcam: Show the coordinates of the camera location and rotation on screen
- setcamspeed: Sets the speed of the spectate camera. Default is 1
- savecampos campos: Save the current camera to the campos number
- togglerot: When enabled, pressing left and right will make the camera rotate instead of strafing
- changecammesh nr: Change the visual camera points to another mesh nr. When no nr is specified, the next mesh is taken
- movecam x y z pitch yaw roll time: Move the camera x, y, z and pitch, yaw, roll from the original point in time 'time'
- movecamto x y z pitch yaw roll time zeroswitch: Move the camera to the specified coordinates and rotate vector in time 'time'. Zeroswitch determines if 0 are the current value or really 0
- movecamtopos pos time: Move the camera to the specified camera position in time 'time'
- moveloc(to)(pos), moverot(to)(pos), movefov(to): Same as above
- stopcam: Stop movement of the camera
- movecamtobetween pos1 pos2 factor t: Position cam between pos1 and pos2 in time t. Factor decides the exact position of the cam, e.g. factor:1/2 is right in the middle.
- togglecamMode: Changes between constant speed cam mode and accelerated/deccelerated mode
- togglerollmode: Changes between constant speed roll mode and accelerated/deccelerated roll mode
- togglepauseAfterMove: Toggles whether UT should be paused after a camera move has been completed
- setairplaneroll rollspeed maxspeed: Make use of airplane rolls instead of user defined rolls. rollspeed is the speed of the roll, and maxspeed is how fast a roll can change, the roll speed can differ per path so experimentation is needed

    Overview of behindview spectator options (added by {GkC}Poema):
- holdBv: Removes the bv adaption of objects, bv will stay a fixed lenght from player
- stickyBv i: The bv is 'sticky'. 0: off, 1: always directly behind the player, 2: current position
- savebvpos i: Save the current behindview position to the campos number
- movebv x y z pitch yaw roll time: Move the behindview x, y, z and pitch, yaw, roll from the original point in time 'time'
- movebvto x y z pitch yaw roll time zeroswitch: Move the behindview to the specified coordinates and rotate vector in time 'time'
- movebvtopos i time: Move the behindview to the specified behindview position in time 'time'
- movebvloc(to)(pos), movebvrot(to)(pos): Same as above
- invertbvz: Toggles 'Duck' to be up or down in behindview
- togglebvmode: Toggles between constant bv camera speed or accelarating/deccelarating
- followflag teamid nroftimes: Follow the flag of team teamid, stopping just before nroftimes flagreturns
- focus name time: Focusses on an object or a player specified by the name and in the specified time
- togglefocusmode: Toggles between constant speed move focus mode and accelerated/deccelerated mode
- rotatecam campos1 campos2: Rotates the camera around camera position campos, much like behindview. The camera will start at campos2.
- rotatecam_dist campos dist: Rotates the camera around camera position campos with distance dist, much like behindview
- togglemovebv: Toggles whether the behindview camera should be moveable with normal movement

    Overview of path options:
- addwp wp time pathnr position: adds waypoint 'wp' to path 'pathnr' with a time of 'time' at a position
- removewp pathnr position: removes last wp of a certain path at a certain position
- printpath pathnr: prints the waypoints of path 'pathnr'
- printpath2 time pathnr overridewptime : prints the waypoints of path 'pathnr' with global time
- settimewp time pathnr position: Sets the time of the waypoint of path 'pathnr' at that position
- changepathmode: Changes the path mode. Possibilities are: Direct, smooth1 and smooth2 movement
- recordPath startpos pathnr: Record a realtime path. startpos is the camera startposition to be used (default=10), Pathnr default is 0
- addrecordwp: Record a new wp in the realtime path. The camera position at which it will be saved will be the last one plus 1
- movepath time pathnr overridewptime: Follows the waypoints of path 'pathnr', where the time is divided over the waypoints with time zero.
- stoppath: Stop the following of a path
- toggletimedistance: Changes between time- and distance-based mode
- show_path time pathhnr overridewptime: Visually shows the path specified
- showpaths time overridewptime: Visually shows all paths specified
- changepathmesh nr: Change the visual path points to another mesh nr. When no nr is specified, the next mesh is taken
- setpathfps fps: Set the fps used to visually show a path

    Overview of additional path options (added by {GkC}Poema):
- IPaddwp wp ratemodifer fovmodifier pathnr position: adds waypoint 'wp' to path 'pathnr' with a a certain rate and fovmodifier at a position
- IPremovewp pathnr position: removes last wp of a certain path at a certain position
- IPprintpath pathnr: prints the waypoints of IPpath 'pathnr'
- setrmwp ratemodifier pathnr position: Sets the ratemodifier of the waypoint of path 'pathnr' at that position
- setfmwp fovmodifier pathnr position: Sets the fovmodifier of the waypoint of path 'pathnr' at that position
- IPmovepath pathnr: Follows the waypoints of IP path 'pathnr'.

Mess with the best, die like the rest
Pages: [1]   Go Up
Print
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
© 2008-2016 | design by radarfox | webmaster VegasKill